Titan CLI & CLII
TITAN II LUBER Automatic Lubricators
The TITAN CL LUBER and TITAN II LUBER are powerful, motor-driven automatic lubricators which are built on the proven ULTIMATE LUBER technology. Choose either single or dual grease cartridges. The TITAN LUBER is refillable by simply replacing standard grease cartridge(s). Its microprocessor controlled, energy efficient motor delivers grease via a fixed displacement pump which produces pressures over 1000 psi. This pressure allows the TITAN LUBER to drive lubricant through long feed lines and cycle multi-point progressive distribution blocks, feeding several bearings consecutively. When a valid dispensing cycle is selected, the unit will activate at programmed intervals. At each interval, the TITAN LUBER dispenses approximately 1.25cc of grease.
TITAN II LUBER Automatic Lubricators
The TITAN CL LUBER and TITAN II LUBER are powerful, motor-driven automatic lubricators which are built on the proven ULTIMATE LUBER technology. Choose either single or dual grease cartridges. The TITAN LUBER is refillable by simply replacing standard grease cartridge(s). Its microprocessor controlled, energy efficient motor delivers grease via a fixed displacement pump which produces pressures over 1000 psi. This pressure allows the TITAN LUBER to drive lubricant through long feed lines and cycle multi-point progressive distribution blocks, feeding several bearings consecutively. When a valid dispensing cycle is selected, the unit will activate at programmed intervals. At each interval, the TITAN LUBER dispenses approximately 1.25cc of grease.
Most powerful self-contained lubricator
- On the market. Produces over 1000 psi which enables it to service single-point applications up to 30’ away (9m.) or multi- point applications up to 20’ (6m.) away.
Available with long life replaceable battery packs
- Or optional external power sources. (AC and DC)
Optional Remote Control available to connect to customer equipment or machinery
(eg: PLC, Contactors, Magnetic Reed Switches, Relays & Limit Switches)
- Multiple settings to empty from 15 days to 2 years.
- Replaceable standard 14 oz grease cartridges (no other tools needed).
Able to service up to 12 lube points with optional progressive distribution block.
Unit is mounted on an easy to install mounting plate – single or multi-point.
Suitable for indoor/outdoor use.
Most powerful self-contained lubricator
- On the market. Produces over 1000 psi which enables it to service single-point applications up to 30’ away (9m.) or multi- point applications up to 20’ (6m.) away.
Available with long life replaceable battery packs
- Or optional external power sources. (AC and DC)
Optional Remote Control available to connect to customer equipment or machinery
(eg: PLC, Contactors, Magnetic Reed Switches, Relays & Limit Switches)
- Multiple settings to empty from 15 days to 2 years.
- Replaceable standard 14 oz grease cartridges (no other tools needed).
Able to service up to 12 lube points with optional progressive distribution block.
Unit is mounted on an easy to install mounting plate – single or multi-point.
Suitable for indoor/outdoor use.
LED operation and warning indicators:
(1-RED, 1-GREEN, 1-BLUE)
1 GREEN flash every 20 seconds
Normal operation
1 GREEN flash every second (approx)
Unit is dispensing grease
1 RED flash every 20 seconds
limit switch error (unit operating in failsafe (timed dispense) mode
2 RED flashes every 20 seconds
low battery warning
1 BLUE flash every 20 seconds
low grease level (grease cartridge needs to be replaced)
2 BLUE flashes every 20 seconds
unit is paused (remote control option) 4 BLUE flashes every 20 seconds
Low Temp, dispensing is paused
LED operation and warning indicators:
(1-RED, 1-GREEN, 1-BLUE)
1 GREEN flash every 20 seconds
Normal operation
1 GREEN flash every second (approx)
Unit is dispensing grease
1 RED flash every 20 seconds
limit switch error (unit operating in failsafe (timed dispense) mode
2 RED flashes every 20 seconds
low battery warning
1 BLUE flash every 20 seconds
low grease level (grease cartridge needs to be replaced)
2 BLUE flashes every 20 seconds
unit is paused (remote control option) 4 BLUE flashes every 20 seconds
Low Temp, dispensing is paused
Temperature Range:
-4°F to +131°F (-20°C to +55°C)
NOTE: Must use Low Temp lubricants in Low Temp applications
Size
Titan CL I w/Mounting Plate
Single Point 17-3/4” H x 6-1/4” W x 8” D
Multi Point 24-1/4” H x 6-1/4” W x 8” D
Titan CL II w/Mounting Plate
Single Point 19-3/4” H x 8-1/4” W x 8” D
Multi Point 26-1/4” H x 8-1/4” W x 8” D
Class 1, Div 2, Groups A,B,C,D; Class II,
Div 2, Groups F & G,
Class III or hazardous locations
In Conformity to European Norms Ex nL IIC T3 II 3 G
Temperature Range:
-4°F to +131°F (-20°C to +55°C)
NOTE: Must use Low Temp lubricants in Low Temp applicationsSize
Titan CL I w/Mounting Plate
Single Point 17-3/4” H x 6-1/4” W x 8” D
Multi Point 24-1/4” H x 6-1/4” W x 8” D
Titan CL II w/Mounting Plate
Single Point 19-3/4” H x 8-1/4” W x 8” D
Multi Point 26-1/4” H x 8-1/4” W x 8” D
Class 1, Div 2, Groups A,B,C,D; Class II,
Div 2, Groups F & G,
Class III or hazardous locations
In Conformity to European Norms Ex nL IIC T3 II 3 G